9
1. Turn the knob clockwise to switch on the Bluetooth module. Set a mid-range
volume level to begin.
2. You will hear a tone and the PWR indicator (LED) will light blue. The LINK
indicator will also flash blue to indicate that the module is ready to pair with
another Bluetooth device.
3. When in pairing mode, activate a Bluetooth connection scan on your device
that will serve as a source of audio. When the search is complete, select a
device named “Galaxy Traveler” from the pairing list. Your device will attempt
to
connect with the Bluetooth module.
4. When the devices have successfully paired, the module will sound a prompt
tone again. The LINK indicator will light steady blue.
5. You are now ready to stream audio via the Bluetooth connection from your
device. You can adjust the audio volume on your device or using the volume
knob on the Bluetooth receiver module.
6. The AF indicator will light when an audio signal is streamed from your
playback device and received by the Bluetooth module.
7. If a phone call is incoming during playback, the audio stream will be
interrupted for the user to take the call. When the call is finished, the
Bluetooth module will be automatically re-link and audio files will continue
playback from where they were interrupted.
8. When a user moves out of range for the Bluetooth connection, the audio
stream will be severed until the user returns to a location within range of the
module. The range is approximately 30 feet. However, it depends on the
operating system that’s installed on the device. Occasionally it’s necessary to
manually reconnect to the Bluetooth following the steps above.
G. Bluetooth Receiver
Module
1.
PWR - Power indicator
2.
LINK - Bluetooth connectivity
indicator
3.
AF - Audio Frequency indicator
4.
On/Off/Volume control knob
2
1
3
4
(TV-RECBT for TV8/TV10)
(TV5-RECBT for TV5i & TV5X)