4
Unpacking and Examining Your Oven
Carefully remove oven from carton. SAVE THE CARTON AS IT MAY MAKE INSTALLATION EASIER.
Remove:
1.
All packing materials from inside the oven cavity; however, DO NOT REMOVE THE WAVEGUIDE
COVER, which is located on the side in the oven cavity. Check to see that there are Installation
Instructions, Wall Template, Top Cabinet Template, bag of Installation Hardware, Charcoal Filter
and Exhaust Damper Assembly. Read enclosures and SAVE
the Owner’s Instructions.
2.
The feature sticker from the outside of the door, if there is one.
Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing
surfaces, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is
any damage, do not operate the oven and contact your dealer.
See Installation Instruction for more details.
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk
of electric shock by providing an escape wire for the electric current. This appliance is equipped with a
cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded.
WARNING
-
Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualified electrician or serviceman if the grounding instructions are not completely
understood or if doubt exists as to whether the appliance is properly grounded. If it is necessary to use
an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot
receptacle that will accept the plug on the appliance. The marked rating of the extension cord shall be
equal to or greater than the electrical rating of the appliance.
Electrical Requirements
The electrical requirements are a 120 volt 60 Hz, AC only, 20 amp. It is recommended that a separate
circuit serving only the oven be provided. The oven is equipped with a 3-prong grounding plug. It must
be plugged into a wall receptacle that is properly installed and grounded.
Power Supply Cord
1.
A short power supply cord is provided to reduce the risks resulting from becoming entangled in or
tripping over a longer cord.
2.
Longer cord sets or extension cords are available and may be used if care is exercised in their use.
3.
If long cord or extension cord is used
：
a)
The marked electrical rating of the cord set or extension cord should be at least as great as
the electrical rating of the appliance.
b)
The extension cord must be a grounding-type 3-wire cord, and The longer cord should be
arranged so that it will not drape over the counter top or table top where it can be pulled on
by children or tripped over unintentionally.
UNPACKING INSTRUCTIONS
GROUNDING INSTRUCTIONS
