MWUK002B
8
INSTALLATION
1.
Ensure that all the packing materials are removed from the
inside of the door.
2.
WARNING: Check the oven for any damage, such as misaligned
or bent door, damaged door seals and sealing surface, broken or
loose door hinges, latches and dents inside the cavity or on the
door. If there is any damage, do not operate the oven and
contact qualified service personnel.
3.
This microwave oven must be placed on a flat, stable surface
strong enough to hold its weight and the heaviest food likely to
be cooked in the oven.
4.
Do not place the oven where heat, moisture or high humidity
are generated, or near combustible materials.
5.
For correct operation, the oven must have sufficient airflow.
Aminimum 20cm of free space is necessary above the top
surface of the oven and 5cm at both sides. The microwave oven
rear plate must be placed close to the wall. Do not cover or
block any openings on the appliance. Do not remove feet.
6.
Do not operate the oven without the glass tray, roller support,
and shaft in their correct positions.
7.
Make sure that the power supply cord is undamaged and does
not run under the oven or over any hot or sharp surface.
8.
The socket must be readily accessible so that it can be easily
unplugged in an emergency.
9.
Do not use the oven outdoors.
RADIO INTERFERENCE
Operation of the microwave oven can cause interference to your
radio, TV, or similar equipment.
When there is interference, it may be reduced or eliminated by
taking the following measures:
1.
Clean the door and sealing surface of the oven.
Summary of Contents for MWUK002B
Page 23: ...MWUK002B 23...
