Galanz MB15001AB, User Manual

Page: 20 / 24

TROUBLE SHOOTING
:85;(2+9.55:/4-
19
Code Problem Cause Solutions
1
Greasy fume emits from the
vent while baking.
Ingredients are stuck to heaters, or the
appliance is being used for the first time, the
heater surface is coated with protective oil. When using the applicance for the first time, press "bake" to
heat for 10 minutes. Then unplug the appliance, clean the
heating tubes after it is completely cooled down.
2
The bread caves in at the
top, the crust is too thick or
too hard.
The moisture is evaporated
1. Tip the bread out immediately when it is done, and let it cool
to 100-120°F before serving, or seal in a storage bag.
2. Use butter instead of vegetable oil to make the bread softer.
3
Mixing paddle is difficult to
take out.
Mixing paddle is installed too tight with the shaft.
After removing the bread, add warm water to the inner bowl,
soak for 10 minutes, then remove the mixing paddles and clean.
The ingredients are not
mixing. The paddle is not installed correctly to the shaft
or not installed at all. Take the ingredients out. Install the mixing paddles properly
then put them back into the inner bowl
Wrong cooking program selected. Check whether the menu fits with the program selected.
The ON/OFF button was pressed mistakenly,
cooking program was stopped.
If the program process is still within 30 minutes, press ON/OFF
to continue the original process.
The lid was opened multiple times during
fermentation, so the bread is dry or colored
poorly.
Do not open the lid during fermentation.
The resistance between the kneading paddle
and the dough is too large, the dough is not
stirred sufficiently. Check if the amount of water is adequate. Check whether the
mixing paddle is broken. Remove the inner bowl, try to turn the
paddle to check for damage.
5
Press "ON/OFF",
"E3"appears on the display. The temperature of the inner bowl cavity it too
high, the program cannot be started. Press "ON/OFF", unplug the cord, take the inner bowl out, open
the lid and let the appliance cool.
6
The motor is working but the
dough is not mixed.
The inner bowl or mixing paddle is not installed
correctly, Or the dough is too big and cannot be
mixed.
Check the inner bowl is installed correctly, and check the dough
recipe.
7
1. No power
2. Does not mix
3. Does not bake
1. The cord is not plugged in correctly.
2. Loose wiring inside the bread machine 1. Check the cord to see if it is plugged in correctly or not.
2. Call the national service hotline.
4
The ingredients are not mix
well, leading to bad baking
results.