INSTRUCTION FOR USAGE
NSTRUCTION FOR USAGE
BUTTON
INSTRUCTION
OF
DISPLAY
The below picture is a schematic diagram of an electronic
display.
Button instruction
“Fridge” button: adjust the setting temperature of refrigerating
chamber (press down is effective).
“Freezer” button: adjust the setting temperature of freezing
chamber (press down is effective).
“Select” button: with each click (within 5 seconds), the
corresponding function icon flickers, and then switch among
quick freezing- intelligence successively (press
down is effective). No operation within 5 seconds will end.
Warning:
The temperature will be set finally and
the flash will disappear without setting operation
over 5 seconds.
The LED display turns bright when the door is open. Push the
“Fridge” button. The buzzer rings. Then the refrigerating room
turns into the setting condition. The temperature patterns turns
flash and the temperature of the refrigerating room increase 1.
The temperature will recycles as “33”—“45”.
THE SETTING OF THE FREEZING ROOM
The LED display turns bright when the door is open. Push the
'freezer' button. The buzzer rings. Then the freezing room turns
into the setting condition. The temperature turns flash and the
temperature of the freezing room increase 1. It will recycle from
“5” — “-8”.
Warning:
The temperature will be set successfully
and the flash will disappear if stop setting over 5
seconds.
12
F unction mode
area display
F ridge button
F reezer button
Select button
F reezing temperature
display
Refrigeration
temperature display
THE SETTING OF THE REFRIGERATOR COMPARTMENT
