background image

SAVE THESE INSTRUCTIONS

6

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

TEMPERATURE CONTROL

The temperature of the appliance is controlled 

by setting the thermostat dial on the front of the

cabinet.

The number 1 indicates the warmest setting. The

number 7 indicates the coldest setting.

The number 5 setting should be sufficient for

regular home use.

The temperature range of the appliance is

approximately 10.4°F to -11.2°F (-12°C to 
-24°C).

To stop the cooling function, turn the dial to the

“0” position.

Notes:

The temperature inside the appliance can
vary based on ambient room temperature, the
frequency that the lid is opened and the amount
of fresh food that has recently been added to the
appliance.

Do not overload the appliance as this can affect
performance.

Do not freeze large quantities of fresh food at
the same time.

Indicator Lights

1. Power indicator light:

 Illuminates when the

appliance is connected to a working power

source.

2. Run indicator light:

 Illuminates when the

compressor is operating.

3. Alarm indicator light:

 Illuminates when the

temperature inside the appliance is too high.

1

2

3

Summary of Contents for GLF10CWED01
















Reviews: