INSTRUCTIONS FOR USAGE
.
Instructions For Usage
5
Connect the device to the power source. All of the
indicator lights will flash once and all of the lights
will be off except the power button. Once this
happens, the machine will be in standby mode.
CONTROL PANEL
8H
4H
2H
Mode Button
Time Button
Light Button
Power Button
BUTTON OPERATION
Mode Button
*Press the Mode Button for 7 seconds to complete the
filter reset.
Power Button
Every time you press the Power Button, the machine
will beep once and then it will turn off or on.
*The background light will display the corresponding
color according to the PM2.5 detection value. See
sheet below:
Number(PM2.5) Air Quality
Air Quality
Light
BLUE
YELLOW
RED
Good
Mildly
polluted
Seriously
polluted
Good
≤75 ug/m
3
75~150 ug/m
3
≥150 ug/m
3
Mildly
polluted
Seriously
polluted
*Note: If the machine is turned off without unplugging
the power plug and then turned on again, the machine
will work in the state before turning off by default.
When using the device, press the Mode Button to adjust
the wind speed among the circulation of Auto-L-H mode.
Every time you press the Mode Button, the machine will
ring once.
Light Button
In the condition of working, press the Light Button to
adjust the light among the circulation of Standard-
Soft-Off. Every time you press the Light Button, the
machine will beep once.
