BIOUK003B
9
a)
For correct operation of the oven, the kitchen housing must be
suitable.
b)
The panels of the kitchen unit that are next to the oven must be
made of a heat resistant material. Ensure that the glue of units
made of veneered wood can withstand 120
℃
temperatures.
Once the oven has been lodged inside the unit, the electrical
part must be completely insulated. This is a legal safety
requirement.
c)
All guards must be firmly fixed into place so that it is impossible
to remove them without using special tools.
d)
Remove the back of the kitchen unit to ensure an adequate
current of air circulates around the oven.
Connecting to the Power Supply
Connection must take account of the current supplied and must
comply with current legal requirements.
The yellow and green grounding line must not be controlled by a
switch. The socket or the ON/OFF switch used for connecting to the
power supply must be easily accessible when the oven has been
installed.
IMPORTANT
：
During installation, the power cable position must be
taken into account. Do not locate the power cable in an area where
the temperature exceeds 50
℃
. The oven complies with safety
standards set by the regulatory bodies and is safe to use only if it has
been adequately earthed in compliance with current legal
requirements on wiring safety. You must ensure the oven has been
adequately earthed.
The manufacturer cannot be held responsible for any harm or injury
to person, animal or belongings caused by failure to properly earth
the oven.
WARNING:
The voltage and the supply frequency are shown on the
rating plate. The cabling and wiring system must be able to bear the
maximum electric power required by the oven as shown on the
specifications plate. If in doubt, contact a suitably qualified person.
