Galak Electronics VG-305B Quick Start Manual Download Page 8

 

Galak Electronics 

 

Warranty Certificate 

 

Galak  Electronics  warrants  that  this  product  is  free  from  manufacturers  defects  in 
material and workmanship.  

WARRANTY PERIOD  

For as long as you own this product we guaranteed it to operate properly under normal 
conditions. 

CONTENTS OF THE WARRANTY 

Should  a  Galak  Electronics  product  fail  at  any  time,  return  it  to  us  using  the  contact 
information below. Galak Electronics will repair it, or at our discretion, replace it at no 
additional charge, and pay the return shipping cost. If the failure is found to be due to 
user  negligence  (i.e.  exceeding  maximum  rated  specifications,  water  damage,  short 
circuits)  you  will  be  charged  a  maximum  cost  no  more  than  the  original  purchase 
price. 

RESTRICTIONS OF WARRANTY 

This warranty has been given provided that the Galak Electronics Product is used in its 
normal  intended  use  and  that  due  care  and  compliance  with  the  instructions  given  by 
Galak  Electronics  are  observed.  The  obligations  of  Galak  Electronics  have  been 
restricted to these warranty terms and conditions and the warranty thus does not cover 
losses  incurred as a result of damage to other property or persons. The warranty does 
not  cover  defects  which  are  the  result  of:  transportation  of  the  Galak  Electronics 
Product; negligence by the user of the Galak Electronics Product or failure to observe 
the  instructions  given  by  Galak  Electronics  or  proper  care;  circumstances  outside  the 
control of Galak Electronics, such as theft, fire, accidents or acts of vandalism; failure 
to  observe  the  installation  or  operating  instructions;  and  normal  wear  and  tear.  The 
warranty  does  not  cover  defects  which  do  not  hinder  normal  operation  of  the  Galak 
Electronics Product, such as repair of superficial scratches.  

 

Galak Electronics 

[email protected] 

Phone: (302) 832-1978

 

 

Summary of Contents for VG-305B









Reviews: