GAR CUT (V. PROFESSIONAL). Instructions Manual.
13
CHAPTER 1. GENERAL DESCRIPTION.
TECHNICAL CHARACTERISTICS.
The cutting function of the GAR CUT (V.
Profesional) machines is carried out by electric
plasma blown with compressed air. They can cut
all kinds of electricity conductor material: Steel,
stainless steel, aluminium, brass, etc.
Table nº 1 – Maximum cutting thicknesses.
GAR CUT 550.
MAXIMUM
RECOMMENDED
THICKNESS
LIMIT THICKNESS
SOFT STEEL
10 mm.
12 mm.
STAINLESS STEEL
10 mm.
12 mm.
ALUMINIUM
6 mm.
7 mm.
The cutting torch and earth clamp are integrated
in the machine. Therefore, they are not possible to
be separated without disassembling.
The following are supplied with the equipment:
- Cutting torch with direct connection.
- Quick connection earth cable.
- Protection goggles.
FOR THE USE OF ANY OTHER ACCESSORY
CONSULT THE MANUFACTURER.
This equipment has protection against:
overheating, lack of pressure in pneumatic circuit,
overloads in the control circuit and contacts with
dangerous voltages during the replacement of
torch head components.
Table no. 2 - Technical characteristics.
TECHNICAL CHARACTERISTICS.
GAR CUT 550
Ref. 457.00.000
Supply voltage (U
1
–3Ph 50Hz)
230/400 V
Maximum primary intensity (I
1max
)
33/19 A
Primary effective intensity (I
1eff
)
19/11 A
Plasmagen gas
AIR
Operating air pressure
5-5,5 bar
Flowrate
120 l/min
I
28 A (100%)
Adjustment positions
II
47 A (35%)
Torch ignition
H.F.
Cutting thicknesses up to
12 mm
Thermal insulation
H (180ºC)
Ventilation
FORCED
Protection index.
IP21
Weight
67 kg.
Application standards
EN 60974
Fig. 1 – General dimensions of
GAR CUT (V. Profesional)
equipment.
