Physilog®) is visible in the XLS or CSV file and the Matlab structure “header”. If you wish to
adapt internal date and time of the Physilog®, read the section above.
⋅
Do not remove the “conf.bin” file from the Physilog, otherwise it will return to a default
configuration. If this happens, update your configuration in the Research ToolKit software or
contact Gait Up's customer support.
5.5. Maintenance and Disposal
Cleaning: Before you clean the device make sure it is turned off and disconnect all
cables. Use water and soap, saline solution or 3% Hydrogen peroxide (H2O2) solution
to clean the Physilog 6S sensor device and its fixation clip accessories. Do not use a
cleaning spray, but carefully wipe all parts using a humid wipe.
Storage: Store in a cool (0°C – 30°C) and dry place. The provided box is the perfect place
for your sensor. Keep away from direct sunlight.
Do not throw Physilog® sensors in the normal trash, dispose of it properly considering
local laws and rules about electronic waste and batteries. Contact Gait Up's customer
support for more information about elimination of Physilog®.
Physilog 6S user manual v1.0.0 Date: 08.01.2021
Copyright © 2021, All Rights Reserved - Gait Up SA. CH-1015 Switzerland
10
www.gaitup.com
