Thermal Receipt Printer
12
3. Serial Port Connection (If you need to set the port to Serial)
a. Click step “Port - COM2 – Finish”
Select a serial port based on the following path:
“Computer→ Properties→ Device Manager→ Port (COM and
LPT) USB Serial Port (COMX) → Click “Configure port”.
b. Refer to the default baud rate of the printer self-testing
page, enter the same baud rate 19200, otherwise there will be
errors in printing. Click “Apply” after confirming the
parameters.
c. The Settings are finished.
d. Return to the "General" and click "Print test page". If the
print test page works normally, the setting is successful.
