Solar Bird Feeder Stake
K143
Instructions for Use
Please read and retain these instructions for future reference
v001: 23/08/21
Before using first time
Remove the protective film from the solar panel.
CHARGING AND OPERATION:
1.
There is an “on/off” switch at the back of the solar panel
case. Twist the lamp shade and find the
switch then push the switch to “on” position. Then replace the cover and position the light in a
sunny location. Charge the solar product by placing it under direct sunlight for at least 8 hours.
2.
The light will work automatically. It will charge under direct sunlight during the daytime and
illuminate at night.
3.
Leave the switch to “ON” position.
NOTE: In order to test the lights simply cover the solar panel with your hand and the light should turn on
automatically.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden
stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first
then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the
ornament housing containing the actual LED light.
