Solar Cascading Rock Fountain
H512
Instructions for Use
Please read and retain these instructions for future reference
v001: 11/12/20
To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden
stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first
then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the
ornament housing containing the actual LED light.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
INSTALLATION:
1.
Attach the pump to the solar panel before use, plug the sprinkler head or hose into the outlet of the
pump. Make sure the water level covers the pump, but is lower than the sprinkler head.
2.
Plug the power line of the pump into the plug of the solar panel, and then fasten.
3.
Position the solar panel in full sun to optimally run the pump, the backup battery will be charged from
the solar panel during normal operation and automatically run the pump without direct sunshine.
4.
If required the pump can be run by the battery in times of low sunlight. Turn on the switch at located at
the back of the solar panel, if the battery is fully charged the pump will start to work immediately.
CHARGING AND OPERATION
1. Turn the switch, which is located under the solar panel, to
“
ON
” positio
n and
the battery will work automatically. Charge the solar product by placing it
under direct sunlight for at least 8 hours. Recommend longer charging time
for the first use. If the switch is
“
OFF
”
the battery will not work, solar panel
ensures the pump works directly.
2.
The light will work automatically.
HOW TO USE:
The pump/fountain function will work best when fully
charged under direct sunlight.
When there is no sun, the built-in batteries will
power the fountain water and light for a minimum of a few hours.
Care and Maintenance Recommendations
1.
Clean solar panel with a soft sponge every couple of weeks.
2.
Make sure all connectors are still tight and no water getting in.
3.
Keep the water clean during the summer keep topping up every 3 or 4 days with clean water.
4.
Clean any pipes every month stop any build-up of algae which could put an extra pressure on your
pump.
5.
Take out any foreign body around the pump and keep clean solar product.
6.
Always make sure there is enough water for the pump to work otherwise you could damage the pump.
