10
/
11
This is a factory command. Only manufacture is able to send this command.
SMS:
*brd*XXX*
(XXX refers to the new brand name)
Device Response: “XXX inform: The new brand name is set.”
16. Low Battery Alert
The Bikelight is equipped with an automatic “Low Battery” detection and alert when the battery
drops to 20% of its capacity.
The Bikelight Alert and PRO models will send an SMS to the Controller cell phone, and routetrack
function will be turned off for power saving.
And the taillight, when activated by motion, stops flashing and remains on as a constant.
17. Command Setting List
Function
SMS Command
Description
APN Setting
*apn*AXXX*BXXX*CXXX*
This command sets the telecom
Access Point Name. BXXX refers to
user name, CXXX refers to password.
Master Setting
*master*1XXXXXXX* +1 refers to the country code.
XXXXXXXX is the cell phone number.
Please make sure country code is
included, and 0 is not needed before
cell phone number
Password Changing
*password*654321*
Original password is default as 123456.
654321 refers to new password.
Vibration Sensitivity
Setting
*sensitive*1-5*
1 being the most sensitive, 5 the least.
Default setting is 1.
Alert Setting
*callalert*
Call alert will call master number 2 times
when motion is detected after 3 minutes
non-movement.
*smsalert*
SMS notification will sent to master
number when motion is detected after 2
minutes non-movement.
*alertoff*
End Call/SMS alert
LLC Query
*locate*
Latest information of latitude, longitude,
date, time and ranking.
Address Query
*locateaddress*
Address information of current location.
Google Map Search
*locatemap*
Google Map link with current location.
Routetrack Setting
*routetrack*1-99*
1-98 represents hours of accumulated
data, 99 means always on.
Routetrack Sampling
*rsampling*1-999*
1-999 represents seconds of data
collecting
interval,
default
as
10
seconds.
Routrack Upload
*rupload*60-999*
60-999 represents seconds of data
uploading interval, default as 60
seconds, minimum rate should not be
less than 60.
