Pub. 42004-550C
Elemec3
Console Manual
—Version 3
Page 4 of 109
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-550C.docx
07/21
5)
Define the System
’s
Zones
Action
Screen
Add zones
•
Enter the zone description.
•
Assign the audio outputs to the zone:
•
Monitor Output
•
Aux Output
•
Assign the amplifier channels to the zone.
•
Assign relay outputs to the zone.
•
Assign relay groups to the zone.
•
Assign logic flags to the zone.
Zone Configuration
Zone Builder screen
6)
Configure the Background Music Source
Action
Screen
•
Select the audio input source (Aux 1–5).
•
Select the zone where background music will play.
•
Select the time interval for amplifier testing.
Playback Audio
→
7)
Import Sound Files for Pre-Recorded Messages
Action
Screen
•
Browse and select an .mp3 file.
•
Import the .mp3 file it into the configuration file.
Playback Audio
→
8)
Define System Tones
Action
Screen
•
Select an .MP3 sound file for a system tone (1–7).
•
Enter a description for a system tone (1–7).
•
Select an .MP3 sound file for the “TICK TONE”.
•
Set the play volume for each system tone.
Playback Audio
→
9)
Add Messages
Action
Screen
•
Add a new message. Enter a message description.
Playback Audio
→
•
Event Setup—Select automatically create events and the
manual and/or auto event check boxes.
•
Select the default zone for the message to play in.
•
Configure automatic logic flag setup.
Create New Message (on page 70)
•
Select the .mp3 sound files to include in the message.
