Pub. 42004-480B
Model 013-02-0095-002
Elemec3
System Controller
Page 8 of 11
e:\standard ioms - current release\42004 instr. manuals\42004-480b.doc
05/14
Wiring
Connections
24VDC IN – Power is supplied to the
Elemec3
System Controller via the
24VDC
IN
connector.
DC Earth – A green-yellow conductor shall be installed between the
DC
E
ARTH
terminal on the rear of
the unit to the Telecoms Earth Bar inside the cabinet.
LAN connection – The
Elemec3
System Controller receives its initial programming and subsequent
updates and modifications via the
LAN
connection on the rear panel.
PABX connection – The interface to the telephone system is made via the
PABX
connector on the rear
panel.
API 1–API 4 – Access panel interface connections. Provides the ability to connect to four access panel
termination PCBAs, which can each be connected to four user access panels with microphones, for a total
of 16 possible.
API 5A–API 5B – Reserved for future use.
SD Card – Reserved for use by a qualified technician.
USB – Reserved for use by a qualified technician.
I/O – Input/output signals that can be used for applications, such as the site Fire & Gas system,
monitoring systems, beacons, or loudspeakers.
24VDC Out – Power can be supplied to other components in the system cabinet.
