Pub. 42004-525A
Model 370-901 SP2 to Page/Party
®
Bridge
Page 16 of 16
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-525A.docx
08/18
Service and Spare Parts
If the equipment requires service or spare parts, contact your Regional Service Center for assistance. If
service is required, a return authorization number (RA#) will be issued. Equipment should be shipped
prepaid to GAI-TRONICS with a return authorization number and a purchase order number. If the
equipment is under warranty, repairs or a replacement will be made in accordance with GAI-TRONICS’
warranty policy. Please include a written explanation of all defects to assist our technicians in their
troubleshooting efforts. Call 800-492-1212 inside the USA or 610-777-1374 outside the USA for help
with identifying the Regional Service Center closest to you.
Table 9. Spare Parts
Model Number
Description
69659-001
PCBA, SP2 to Page/Party
®
Interface
40404-105
replacement ac power supply
Specifications
Electrical
Supply voltage ........................................................................................................................... 120/230 V ac
Input frequency range ...................................................................................................................... 50/60 Hz
Ethernet ............................................................................................... 100Base-TX/1000Base-T with IGMP
Output relay contact rating ...................................................................................................... 1 A @ 30 V dc
Channel isolation inputs ................................................................................................................ dry contact
Ethernet
Cable ............................................................................................................................... Category 5 or better
Speed ............................................................................................................................ 100 Mbps (minimum)
Maximum stations ................................................................................................................................... 4096
Mechanical
Construction .............................................................................. high-impact glass reinforced polyester, gray
Dimensions ................................................................... 13.0 H ×9.25 W × 4.00 D in (330 × 325 × 102 mm)
Mounting ......................................................................................................... wall mount, four 0.28 in holes
Environmental
Temperature range ..................................................................................+32 °F to +122 °F (0 °C to +50 °C)
Relative humidity ......................................................................................................... 95%, non-condensing
Audio
Frequency response ............................................................................ 250–3,000 Hz, +0/−3 dB ref. to 1 kHz
Distortion ..................................................................................................................... <1.5% THD @ 1 kHz
FCC & ICES Information:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at their own expense.
