background image

Pub.  42004-374A 

GAI-TRONICS  3030 KUTZTOWN RD.  READING, PA  19605 USA

610-777-1374  

„

  800-492-1212  

„

  Fax:  610-796-5954 

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

 

G A I - T R O N I C S ®  

A   H U B B E

 

L L   C O M

 

P

 

A N Y  

Model 370-202 Interface Amplifier 

Assembly for Electro-Sound 

Confidentiality Notice 

This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive 
business and technical information that is confidential and proprietary to GAI-Tronics.  GAI-Tronics 
retains all intellectual property and other rights in or to the information contained herein, and such 
information may only be used in connection with the operation of your GAI-Tronics product or system.  
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. 

Introduction 

The Model 370-202 Interface Amplifier for Electro-Sound allows GAI-Tronics’ Page/Party

®

 systems to 

interface with GAI-Tronics’ Electro-Sound systems.  This unit interconnects two voice circuits that are 
dissimilar in voltage and/or impedance.  The interface amplifier is not just a matching transformer; it also 
includes a gain adjustment that compensates for differences in signal levels or permits use with a range of 
signal level.  It can also be used in other paging systems. 

Consisting of: 

Model 
No. 

Amplifier Enclosure 

370-202 371-202 

372A 

Installation 

WARNING

Do not install the Model 370-202 equipment in hazardous areas; such installation may cause a safety 
hazard and consequent injury or property damage. 

Enclosure Placement 

The Model 370-202 Interface Amplifier Assembly should be located near the Model 10456-001 
Electro-Sound power source and within 300 feet of the Model 305-001 Line Balance Assembly for the 
GAI-Tronics Page/Party

®

 system. 

Summary of Contents for 370-202











Reviews: