Pub. 42004-401D
Model 10961-101 AMI Centra-Page Interface
Page: 12 of 22
p:\standard ioms - current release\42004 instr. manuals\42004-401d.doc
02/16
14.
Connect the 61531-035 cable assembly to the bottom card rack’s TBX04 according to the table
below, except for the black wire, which goes to the position 2 of the terminal block for the crew’s
quarters.
Card Rack - TBX04
Terminal Wire
Color Function
TBX04-4 Orange Alarm
mute
TBX04-5 Yellow Alarm
TBX04-6 Red/blue Page
TBX04-7 Black/yellow
Alarm
common
TBX04-8 Red
Party
2
TBX04-9 Tan/red Party
common
TBX04-10 Violet
Party
1
TBX04-11 Blue/red Page
common
15.
Install the modular RJ11 splitter into the RJ11 jack on the rear on the AMI. Connect the phone cable
from the AMI Centra-Page Interface into one of the splitter RJ11 jacks. Connect the telephone line
into the other splitter RJ11 jack.
16.
Remove the Flash Memory card from the AMI and replace it with the Flash Memory card that came
with the AMI Centra-Page Interface. Keep the Flash Memory card as a spare.
N
OTE
:
The 12 V dc Walpac is not used in this installation.
17.
Connect the 33-ohm resistor to Page L1 and L2 on the P1 connector of the AMI.
18.
All field wiring is brought into the terminal blocks on the cabinet back panel. After the field wiring is
connected, apply 24 V dc to TB11 on the central cabinet’s rear panel. Refer to Figure 3.
