23
English
-
Remove the coffee grounds container and empty it.
-
There is too much powder in the brew group. Clean the brew
group.
-
You forgot to place the lid on the coffee bean hopper. If you do
not place it back within 30 seconds the display will return to the
main menu and the brewing cycle will be stopped.
-
If an error code is triggered, check the section ‚Meaning of error
codes‘ to see what the code on the display means and what
you can do. The machine cannot be used when this icon is on
the display.
Meaning of error codes
Error code
Problem
Cause
Possible solution
1
Coffee grinder blocked
Coffee exit duct clogged Clean the coffee exit
duct thoroughly with
the handle of the
multifunctional tool or a
spoon handle.
3 - 4
The brew group cannot
be removed.
The brew group is not
positioned correctly.
Close the maintenance
door. Switch the
machine off and back
on again. Wait for the
‘machine ready’ icon
on the display and then
remove the brew group.
5
Water circuit problem
There is air in the water
circuit.
Remove and place
back the water tank a
couple of times. Make
sure you insert it into
the machine properly.
Check if the water tank
compartment is clean.
4219_460_3729_1_booklet_A5_v1.indd 23
14/02/17 08:58
