32
FUNZIONE SOLO ASPIRAZIONE:
VACUUM ONLY FEATURE:
-
The appliance can be operated as a vacuum cleaner with water filter
-
Leave ON the Accessory switch (M), marked with the symbol , only;
-
Press the blue switch (11) to activate the liquids vacuum feature.
-
To adjust vacuum, operate the knob (A). Rotate the knob anticlockwise for powerful suction, and
clockwise for weaker suction
(Fig. 11)
.
BLOWING FEATURE:
-
Install the quick connection (3) to the rear blow socket (O) once you have removed the muffler (P);
-
Press the blue switch (11) to activate the blowing function.
NOTE
Build-up of foam in the recovery tank (G) can jeopardise the correct functioning of the
safety float.
An overfilling of the tank will cause the safety float to shut. In this case, the motor revs
will increase and the appliance will not perform any vacuuming.
NOTE
Before disconnecting the quick connection (3) of the hose (Fig. 8) from the (D) or (O)
socket, turn off the boiler (B) and accessory (M) switches and unplug the appliance.
Fig. 13
13
14
14 BIS
Fig. 15
13
16
16 BIS
Fig. 12
12
Fig. 14
13
15
15 BIS
MULTIPURPOSE BRUSH (Fig. 12)
This tool is fitted with a joint that allows the brush to rotate
by 360
°
, so the multipurpose brush can effectively clean
areas that are particularly hard to reach (under units of
furniture, beds, high rise shelves, etc.). The multipurpose
brush consists of a universal element (12) which can be
fitted with the following parts according to need:
- Bristled frame (13) with rubber inserts (14 and 14 BIS) for
hard floors and surfaces.
(Fig. 13)
- Bristled frame (13) with stiff inserts for fitted and loose
carpets (15 and 15 BIS).
(Fig. 14)
- Bristled frame (13) with bristled inserts (16 and 16 BIS),
for vacuum-cleaning applications
(Fig. 15)
