SAVE THESE INSTRUCTIONS
Introduction:
Congratulations. You have purchased a fine Gaggia product that is the perfect companion for your espresso machine.
Freshly ground coffee will greatly enhance the taste of the coffee you enjoy.
1. Insert plug into a wall outlet having a voltage that corresponds with voltage indicated on bottom of grinder.
2. The upper container (1) holds about 5 oz. (150 gr.) of coffee beans. Place beans in container and replace cover (2) to
preserve the beans’ freshness.
3. Grinding can be adjusted from “very fine” to “coarse”. Grasp the upper container and turn it to the extreme right. This
positions corresponds to “very fine”. Turning the container to the left will result in a coarser grind.
Espresso pump-machines require a fine grind. But since machines differ, you may have to experiment with the degree of
fineness that is best for your machine. (If coffee flows too fast, grind may be too coarse if coffee flows very slowly, coffee
grind may be too fine). Refer to your epresso machine instructions for more information.
4. Make certain that lower container (4) is fully inserted in machine. To turn “on”, depress switch (3) and hold down. Keep
it “on” only long enough to make desired amount of coffee, then release switch.
IMPORTANT: Do not operate grinder for more than 1 minute at a time.
cause damaqe to the motor, Allow
about a 2 minute pause between grinding.
5. Grasp lower container and pull forward to remove. Remove cover (5) and measure out coffee as required.
Unplug cord before cleaning. With a damp cloth or sponge wipe clean any coffee powder that is present.
Grinder Parts:
Coffee bean container
2. Coffee bean container cover
3. Power on-off switch
4. Ground coffee container
5. Ground coffee container cover
