background image

36

English

Problem

Cause

Solution

The “” filter 

cannot be inserted.

 

Remove the air from the filter.

Let the air bubbles out of the filter.

The tank still contains some water.

Empty the water tank before installing the filter.

The rubber seal is not inserted onto 

the “”

 filter.

Check the packaging and insert the seal onto 

the “”

 filter.

You can not activate the 

“” filter.

Another filter is already active

The machine indicates the filter usage in 

percentage.

However, if you want to activate a new filter 

before the one currently in use has expired, the 

latter must be disabled first and as described 

in section “Replacing water filter”

There is some water 

under the machine.

The drip tray is too full and has 

spilled over.

Empty the drip tray when the mark appears 

though the tray. Always empty the drip tray 

before starting the descaling procedure.

The machine is in 

DEMO mode.

While switching on the machine, 

you pressed a combination of 

buttons (

HOME

 

HOME

 - 

CLEAN/SET

 

clean/setting

 – 

HOME

 

HOME

 - 

CLEAN/SET

 

clean/setting

).

Switch the machine off and on again, with the 

ON/OFF

 

ON/OFF

 button on the control panel.

GAGGIA accessories

Coffee and accessories are available through authorised centres (Italy), 

or distributors in your country.

Milk circuit cleaner 

(Philips)

Descaling product

Coffee oil remover

water filter

Coffee range available in beans and powder: 100% Arabica / Intense / Decaffeinated

4219-465-02851 MAN. GAG. MAGENTA Milk 120V EN-FR Rev 01.indd   36

21/01/2021   12:05:51

Summary of Contents for GAGGIA MAGENTA MILK













































































Reviews: