ʑ
a
a
ʑ
a
ʑ
+
ü
ü
ü
|
ü
c
+c
ü
9
10
Normal noises
During drying, the compressor and the pump generate some noise which is entirely normal.
The compressor in the dryer may
occasionally generate a humming noise.
The volume and pitch of this may vary
depending on the selected
programmes and the progress of the
drying.
The compressor in the dryer is ventilated
from time to time, which creates a whirring
sound.
The automatic cleaning process causes
a clicking noise.
The process of pumping the condensation
into the condensate container generates
pumping noises.
11
What to do if ...
If you cannot rectify a fault yourself (e.g. by switching the dryer off/on), please contact our
after-sales service.
We will always find an appropriate solution and will avoid unnecessary visits by engineers.
Trust the expertise of the manufacturer and rest assured that the repair will be carried out
by trained service technicians using original spare parts.
The contact details of your local
after-sales service
can be found in the enclosed after-sales
service directory:
–
GB
0344 892 8988 (Calls charged at local or mobile rate.)
–
IE
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please specify the product number (E-Nr.)
and production number (FD) of your appliance(see inside of door).
Switch the dryer off using the programme selector and unplug the mains plug from
the socket.
ʠ
Please empty condensate
container
is displayed.
Emptying the condensate container
a
Page 4.
Press any button.
Press the
$
(
START
/PAUSE) button again.
ʠ
Please empty condensate
container
is displayed and the
drying cycle is interrupted.
If the condensation drain hose is connected, check it and,
if necessary, clean it.
Stopper in the condensate container?
a
separate
Instructions for condensation drain.
Is the filter in the condensate container dirty?
a
Clean the
filter in the condensate container
a
Installation and
maintenance instructions, Page 3.
ʠ
Residual water in the
condensate container despite
the dryer being connected to
the condensate drain.
Not a fault. If the condensation drain is installed, residual
water remains in the condensate container due to the
dryer's self-cleaning function.
ʠ
Please clean lint filter
is
displayed.
Clean the fluff filters
a
Page 4
.
Press the
$
(
START
/PAUSE) button again.
ʠ
Dryer does not start.
Has the
$
(
START
/PAUSE) button been pressed?
Door closed? Ambient temperature greater
than 5 °C? The optimum ambient temperature for drying
is between 5 °C and 35 °C.
ʠ
Water is leaking out.
Make sure the dryer is level. Push the condensate
container back in until it locks fully into place.
ʠ
ʠ
a
a
a
a
ʠ
ʠ
ʠ
ʠ
a
a
a
a
a
a
a
a
a
a
a
a
