Gaggenau WS061102, User Manual And Installation Instructions, Page: 18 / 24

en
Installation instructions
18
5.
Use the two screws to tighten the two metal retain-
ers on the back of the appliance.
‒
Ensure that the metal retainers are aligned ex-
actly with the edge of the appliance.
6.
Slide the appliance into the fitted unit and check
whether the tilt protection engages.
7.
If required, correct the position of the bracket with
the elongated hole.
8.
Screw the brackets to the fitted unit.
9. Remove the adhesive strip from the appliance front.
10.
Open the appliance carefully and check whether the
tilt protection is working.
11.
Take the appliance out of the unit.
Installing the appliance
1.
Insert the power cable fully into the appliance.
2.
Push the appliance all the way into the fitted unit.
‒
Do not pinch the power cable.
3.
Remove the two metal plates from the retaining
plate.
4.
Hook the retaining plate onto the appliance.
5.
Centre the appliance using the centre marking on
the retaining plate and on the bottom of the unit.
6.
Open the appliance.
7. Screw the appliance to the fitted unit.