Troubleshooting
en
63
Fault
Cause
troubleshooting
The door cannot be opened. The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
Water level is too high.
▶
Start the
Drain
programme.
Power failure.
▶
Open the door using the emergency
release.
The water is not draining.
Drain pipe or water outlet
hose is blocked.
▶
Clean the drain pipe and the water
outlet hose.
Drain pipe or water drain
hose is caught or jammed.
▶
Ensure that the drain pipe and wa-
ter drain hose are not kinked or
trapped.
Drain pump is blocked.
▶
Rinse Hold
is activated.
▶
Continue the programme by select-
ing
Spin
or
Drain
and pressing
.
the programme status is Rinse
Hold", Page 44
The water outlet hose is con-
nected too high.
▶
Install the water outlet hose at a
maximum height of 1 metre.
Pump cover is not correctly
assembled.
▶
Correctly assemble the pump
cover.
Pump cover is not correctly
assembled.
▶
Correctly assemble the pump
cover.
Water is not flowing in. De-
tergent is not being dis-
pensed.
You have not pressed
.
▶
Press
.
The filter in the water inflow
is blocked.
▶
"Clean the water inflow filter"
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is
kinked or jammed.
▶
Ensure that the water inlet hose is
not kinked or jammed.
Summary of Contents for WM260164
Page 1: ...User manual and assembly instructions WM260164 Washing machine Gaggenau...
Page 19: ...Installation and connection en 19 In doing so hold the foot tight and do not adjust its height...
Page 59: ...Cleaning and servicing en 59 3 Connect the water inlet hose and check for leaks...
Page 75: ......