Home Connect
en
55
Energy management
You can connect your appliance to your
smart energy system (Energy manager).
Once you have connected your
appliance to the smart energy system
(Energy manager) and activated the
Flex Start
function, you will be able to
optimise your energy consumption
because your appliance will not start up
until your home photovoltaic system can
provide sufficient energy or the energy
tariff is good.
Further information and system
requirements for using the Energy
manager can be found at:
www.home-
connect.com/energymanagement
Notes
■
The smart energy system (Energy
manager) must use the EEBus
initiative communications standard.
■
Before you start, read the smart
energy system instruction manual to
find out how to connect your
appliance to the smart energy
system (Energy manager).
1.
Press
energy mngmt.
.
2.
Press
Connect
.
Your appliance now attempts to connect
to the smart energy system (energy
manager).If the appliance has
connected successfully,
Connected
è
appears in the display.
3.
Activate Flexstart if you want the
smart energy system (Energy
manager) to start up your appliance.
Flex Start
Activate the
Flex Start
function to allow
your smart energy system (Energy
manager) to start your appliance once
your home photovoltaic system is able
to provide sufficient energy or the
energy tariff is good.
Note:
Your smart energy system
(Energy manager) cannot start your
appliance until it is connected to the
appliance.
1.
Select the programme you require.
2.
Press
Finished in
(
6
).
3.
Select the time period you require.
Note:
The time period can be set in
1-hour increments up to 24 h.
4.
Press
A
.
Delayed start
appears in the display.
5.
Press
˜
.
Flex Start
appears in the display.
The
FlexStart
function has now been
activated and the appliance will wait to
be remotely started by the smart energy
system (Energy manager).
: Ready in approx.
appears in the
display. The smart energy system
(energy manager) has set a time at
which your appliance can start. The
program will end after the specified
time.
Notes
■
If the smart energy system (Energy
manager) does not start your
appliance, the programme will still
be started before the set time period
ends.
The programme will end when the
time period ends.
■
To prevent the build-up of odours,
the appliance is always started with
Flex Start
such that the laundry
never remains in the drum for more
than 6 hours after the programme
has ended.
'UXPFOHDQDGYLFH
HQHUJ\PQJPW
1RWFRQQHFWHG
&RQQHFW
6RIWZDUHXSGDWH
