Gaggenau VR 414 610, Installation Instructions Manual, Page: 9 / 40

9
Flush installation: The appliance can be installed in
the following temperature- and water-resistant
countertops:
▯
Stone countertops
▯
Plastic countertops (such as Corian®)
▯
Solid wood countertops: Only in consultation with
the manufacturer of the countertop (seal cut-out
edges)
▯
Installation in other countertops only in
consultation with the manufacturer of the
countertop.
Installation in countertops made of particleboard is
not possible.
Note: Any cut-out work on the countertop must be
performed in a workshop according to the installation
diagram. The cut-out must be made cleanly and
precisely since the cut-out edge is visible on the
surface. Clean and degrease the cut-out edges with a
suitable cleaning agent (bear in mind silicone
manufacturer's processing instructions).
Combining several Vario devices:
For combining
several Vario appliances, the connecting strip VA 420
000/001/010/011 is available separately as an
optional accessory. When creating the cut-out, bear in
mind the additional space required between the
appliances for the connecting strip (see installation
instructions VA 420 000/001/010/011).
Appliances can also be installed in individual cut-outs,
bearing in mind a minimum distance between the
devices of 2" (51 mm).
When combining several appliances with or without
appliance cover, you can use the appliance extensions
VA 450 110/-400/-600/-800/-900 (depending on
appliance width) to balance out dimension
differences.
Combination with appliance cover:
The appliance
cover VA 440 010 is available separately as a special
accessory. When creating the cut-out, bear in mind
the additional space required for the appliance cover.
9$
9$
9$
PLQ
PLQ