Draining the cooking liquid from the cooking
basin:
Proceed as follows:
– If you do not have a permanently fitted water
connection, place a vessel (e.g. a 10 l bucket)
under the drain valve of the additionally installed
drain installation set AG 060-000.
– Turn the “Temperature" control knob to the left
to the
(Drain valve) position.
– Turn the “Timer" control knob to the left
to the
position and hold the knob in this
position (Fig. 12).
– An audible signal is sounded. The
symbol
(Drain valve) flashes on the display after a few
seconds. The drain valve is opened.
– The
(Drain valve) symbol lights up
permanently in the display when the drain valve
is open.
Closing the drain valve:
– Turn the “Temperature" control knob to the left
to the
(Drain valve) position.
– Turn the “Timer" control knob to the right to
the
+
position and hold the knob in this position
(Fig. 13).
– An audible signal is sounded. The
symbol
(Drain valve) flashes on the display after a few
seconds. The drain valve is closed.
– The
symbol (Drain valve) goes off as soon as
the drain valve has been closed.
Note:
the
(Drain valve) symbol flashes on the
display if the drain valve is not completely open or
closed.
If you do not have a permanently installed
drainage connection, place a temperature-resistant
receptacle of a corresponding size (at least 10 l)
under the drain valve and install the drain
installation set AG 060-000.
11
Caution!
Allow the water or the cooking liquid to
cool down before draining it. This avoids
steaming in the base cabinet and
scalding. Pay attention to regular
descaling if the water is highly limey.
Otherwise, discoloration and heat build-
ups may be the result.
Fig. 12
Fig. 13
!
