Gaggenau VI 462 103, Instruction Manual

Page: 21 / 36

21
Locking the control panel for cleaning
en
A
Locking the control panel for cleaning
Locking the control panel for cleaning
Wiping over the control panel while the hob is switched
on may alter the settings. To avoid doing this, you can
use the hob's "Lock control panel for cleaning" function.
To switch on: Touch the
−
symbol. An audible signal
will sound. The indicators for the active functions will
flash. The control panel will be locked for 10
minutes.
You will now be able to clean the surface of the control
panel without altering the settings.
To switch off: Touch the
−
symbol again within the next
10 minutes.
If the function is not deactivated within these
10
minutes, the hob will switch itself off.
Notes
– The locking function does not affect the control
knobs.The hob can be switched off at any time.
– While the locking function is active, the power
supply to the hob is disconnected. The hotplates
may still be hot.
b
Automatic safety switch-off function
Automatic safety switch-off function
For your protection, the appliance features a safety
switch-off function. Depending on which heat setting
has been selected, the hotplate's heating element will
be deactivated if no further action is performed within a
set time after selecting the heat setting.
An audible signal will indicate when this time has
elapsed. The control knob is active and the illuminated
ring around it will flash.
”‰
will be lit on the hotplate
display.
Turn the control knob to position 0. The appliance can
now be switched back on as usual.
Heat setting Deactivated after
‚
10 hours
ƒ
to
…
5 hours
†
to
ˆ
4 hours
‰
3 hours
Š
to
‚‹
2 hours
‚‚
to
‚ƒ
1 hour
Frying sensor temperature setting Deactivated after
‚
to
†
3 hours