Gaggenau VI 411-610 Operating And Assembly Instructions Manual Download

Page: 21 / 24

9000030391 en 02.05 EB

Installing the cooktop

• Firmly plug the connecting cable in the cooktop

and in the control panel (the plugs must lock into
place).

• Turn the clamping screws to the side. Insert the

hob with the control panel on the front into the
cut-out and align it.

Note:

do not stick the hob onto the worktop with

silicone.

• Turn the clamping screws under the countertop

and tighten them evenly. Do not tighten the clam-
ping screws too tightly, as a uniform sealing gap
should be left all round.

• Connect the appliance to the electricity. Test that

it functions correctly. If the luminous disc behind
the control knob blinks, check the connecting
cable between the appliance and the control
panel is firmly plugged in.

Summary of Contents for VI 411-610

























Search results

Summary of Contents for VI 411-610

Reviews:

Related manuals for VI 411-610

Brands by name

Popular brands

Gaggenau VI 411-610, Operating And Assembly Instructions Manual

Search results

Summary of Contents for VI 411-610

Reviews:

Related manuals for VI 411-610

Brands by name

Popular brands