Gaggenau VG425115F, Information For Use, Page: 9 / 16

Basic operation
en
9
¡
Position the cookware
in the middle of the
burner, otherwise it
may tip over.
¡
Do not position large
cookware on the burn-
ers close to the con-
trols.
¡
The controls may be
damaged due to over-
heating.
¡
Place the cookware on
the pan supports.
¡
Never place the cook-
ware directly on the
burner.
¡
Before using the appli-
ance, ensure that the
pan supports and the
gas burner covers are
positioned correctly.
¡
Handle the cookware
that is on the cooktop
carefully.
¡
Do not bang on the
hob.
¡
Do not place heavy
weights on the cook-
top.
¡
Never use multiple
burners to heat up
cookware. The build-
up of heat that results
from this will damage
the appliance.
¡
Do not heat grill
stones or paella pans.
¡
Only use cookware up
to the maximum per-
missible diameter.
→
"Suitable cookware",
Page 8
7 Basic operation
7.1 Fitting burner parts
You can find out how to correctly position the burner
parts here.
1.
Ensure that the burner parts are clean and dry.
2.
Ensure that the individual parts of the burners are fit-
ted in their exact position and are straight; other-
wise, this may result in ignition problems or prob-
lems during operation.
3.
Fit the burner head and the burner ring in such a
way that the latches on the lower section of the
burner click into place in the corresponding slots.
The alignment of the burner head and the burner
ring is not important.
7.2 Using suitable cookware
1.
Only use cookware with a suitable diameter.
→
"Suitable cookware", Page 8
2.
Ensure that the cookware does not protrude over
the edge of the cooktop.
7.3 Switching on the appliance
Your gas hob has an automatic quick-ignition function.
WARNING ‒ Risk of fire!
Escaping gas may ignite.
▶
If the burner does not ignite after 10 seconds, turn
the control knob to the "Off" position and open the
door or window in the room. Do not attempt to re-ig-
nite the burner for at least one minute.
▶
In the event of the burner flames being accidentally
extinguished, turn off the burner control. Do not at-
tempt to re-ignite the burner for at least one minute.
Requirement:
All burner parts and the pan support are
correctly aligned.
→
"Fitting burner parts", Page 9
1.
Place suitable cookware on the pan support.
→
"Suitable cookware", Page 8