Preparing the cabinet
• Cut out the recess for the hob in your worktop.
Proceed as indicated on the installation sketch.
The installation sketch contains the measurements
of the space required for the trim between the
appliances. Several appliances can also be
installed in individual recesses, as long as a
minimum clearance of 50 mm is kept to between
the appliances.
• As shown in the installation sketch, drill the
Ø 35 mm holes to secure the control knobs in the
cabinet front.
• If the cabinet front is thicker than 26 mm, the front
must be routed from the back to max. 26 mm on
an area of 80 x 310 mm.
16
765
60
1575
1170
360
90
490
min. 50
min. 35
510
35
380
10
8
35
140
220
76
280
min.105
max.162,5
min.105
max.162,5
765
1575
1170
360
90
380
490
min. 50
min. 35
510
8
35
140
220
76
280
60
10
35
VC 421
VC 422
D > 26
D = 26
80 x
310
min. 5
16 – 26
min. 5
