Gaggenau VC 230-613 Operating And Assembly Instructions Manual Download Page 13

12

6.1 Important notes on installation

Pay attention to the "Important notes" (Chapter 1).

The appliance must

only be installed by an

authorised specialist, paying attention to the
relevant regulations of the power supply companies
and the regional construction regulations.

The 

installing technician 

is responsible for

perfect functioning of the appliance at its
installation location. The operation principle must
be explained to the user with reference to the
operating instructions. He must draw the user's
attention as to how to isolate the appliance from 
the mains whenever necessary. 

This cooker corresponds to 

heat class Y

and must

be installed in a cabinet as detailed in the sketch
(Fig. 8 + 9). 

When establishing the 

electrical connections

,

make sure that connecting leads cannot come into
contact with hot parts of the cooking surface.
Protection against shock hazards must be ensured
after installation!

Pay attention 

to the data on the rating plate and

connect the PE conductor. Connect the connecting
cable to the mains. The appliance can be
connected with an earthing-pin plug or it can be
connected permanently.

Shock hazard protection

from below must be

ensured after installation, e.g. by the installation of
an intermediate shelf that can only be removed
using tools.

Damages 

caused by failure to observe these

installation instructions cannot be recognised. 

There should be a distance of at least

20 mm (

13

/

16

”)

between the edge of the appliance and
combustible walls or furniture items.

The distance between the intermediate shelf and
the worktop in which the range is recessed must be
at least

70 mm (2

3

/

4

”)

.

There should be a distance of at least

20 mm (

13

/

16

”)

from the bottom edge of the housing trough and the
next combustible item of furniture.

If installed at an offset above a base cupboard or 
if several appliances from the Vario series are
installed adjacently, the housing can lie on the side
walls of the cupboard.

Note:

please note that a distance of

10 mm (

13

/

32

”)

from the cupboard side walls  must be observed for
safety reasons.

This appliance may be installed in kitchen
combinations made of wood or similar combustible
materials without taking additional measures.

Note:

do not stick the cooking surface onto the

worktop with silicone!

6. Assembly instructions

Summary of Contents for VC 230-613


















Reviews: