background image

8

3.1 Switching on /off

Switching on:

Switching off:

Individual residual heat display

Switching on:
Front cooking zone

Turn control knob 

2 to the left or right

to the

required cooking level (1-9). (Fig. 4)

Rear cooking zone

Turn control knob 

3 to the left

to the required

cooking level (1-9). (Fig. 4)

The power is set continuously variably.

Note:

the pilot light 

1

lights up as soon as a cooking

level has been set.
A few seconds after switching on, the individual
residual heat display (red dot) indicating the
chosen cooking zone lights up in the residual heat
display panel.

Switching off:

Turn the control knob to the 0 position (Fig. 5).

Note:
Control knob 

3

(with combination function) 

cannot

be switched from the combination position directly
to the 0 position.

The glass-ceramic cooker additionally features 
an 

individual residual heat display

. It lights up

in the residual heat display panel as a red dot for
each cooking zone. When this red dot lights up, the
cooking zone concerned cannot be touched, not
even after switching off.

3. Operation

0

1

9

3

7

0

1

9

3

7

Fig. 4

2

1

3

0

1

9

3

7

0

1

9

3

7

Fig. 5

Fig. 6

Summary of Contents for VC 230-612

















Reviews: