background image

11

 Operating the appliance      

en

1

Operating the appliance

Operating the appliance

Switching on the appliance

1

Press the 

main On/Off switch

The appliance starts refrigerating, and the light 
switches on when the door is open.

2

Set the required temperature. 

~

 "Setting the temperature" on page 11

Operating tips

After the appliance has been switched on, it may 
take several hours until the set temperatures are 
reached.

The sides of the housing are heated slightly in 
certain areas. This prevents condensation 
in the area of the door seal.

Switching off and disconnecting the 
appliance

Switching off the appliance

Press the 

main On/Off switch

.

The appliance will stop refrigerating.

Shutting down the appliance

If you do not use the appliance for a prolonged period:

1

Pull out the mains plug or switch off the fuse.
The appliance no longer cools.

2

Clean the appliance.

3

Leave the appliance open.

Setting the temperature

Recommended temperature

Wine storage compartment

1

Use 

¡

 button to select the desired compartment.

2

Keep pressing 

A

/

@

 button until the display 

indicates the desired temperature.

3

The appliance stores the setting and automatically 
returns to the main screen after a few seconds.

Display light

You can use the preprogrammed light modes to 
illuminate your wine bottles when the door is closed. 
The individual climate zones have different illumination 
levels.

Using the display light

1

Press 

n

 button to open the 

Display light

 menu.

2

Select a light mode or press 

o

 button to switch the 

display light off.

3

Press 

 button.

The setting is saved.

Switching off display light

To switch the display light off, press 

o

 button.

Note: 

This also hides the 

n

 button for opening the 

Display 

light

 menu.Press the button again to unhide the 

n

 button.

Humidity

If bottles with natural corks are stored for longer than 4 
weeks, the corks may shrink if the humidity is too low.

To prevent this from happening, store old wine bottles 
so that the cork is kept damp and increase the humidity 
level.

Switching humidity on and off:

1

Use 

¡

 button to select the desired compartment.

2

To switch on the higher humidity level, press 

^

 button.

The 

^

 symbol appears in the display.

To switch off, press 

[

 button.

The 

[

 symbol appears in the display.

3

The appliance stores the setting and automatically 
returns to the main screen after a few seconds.

Wine storage compartment:

11 °C

Summary of Contents for Vario RW414365

























Reviews: