en
Additional functions
16
Do not put any food in the appli-
ance until the set temperature has
been reached.
¡
The housing to the left, the right
and beneath the cool-fresh com-
partment may heat up slightly tem-
porarily. This prevents condensa-
tion in the area of the door seal.
¡
When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
7.3 Switching off the appli-
ance
▶
Press .
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
▶
Press / repeatedly until the
temperature display shows the re-
quired temperature.
The recommended temperature in
the refrigerator compartment is
4 °C.
Setting the cool-fresh
compartment temperature
Note:
The standard setting of the
cool-fresh compartment is preset at
0. Setting 0 corresponds to a temper-
ature of around 0 °C. You can set
the temperature in the cool-fresh
compartment to 3 settings warmer or
colder.
A change in the standard setting will
affect the temperature in the refriger-
ator compartment and the freezer
compartment.
Tip:
If frost forms on the food items
in the cool-fresh compartment, set a
higher cool-fresh compartment tem-
perature.
1.
Press and hold until the temper-
ature display flashes.
2.
Press / to change the setting.
– Setting –3 corresponds to the
coldest setting.
– S3 corresponds to the
warmest setting.
a
The selected setting is saved after
one minute.
Setting the freezer compartment
temperature
▶
In order to set the freezer compart-
ment temperature, change the re-
frigerator compartment temperat-
ure →
The refrigerator compartment tem-
perature influences freezer com-
partment temperature. Refrigerator
compartment temperatures that
are set to warm generate warmer
freezer compartment temperatures.
Additional functions
8 Additional functions
Additional functions
8.1 Fast function
With the Fast function, the refrigerator
compartment and the freezer com-
partment cool more intensively.
Switch on the Fast function 4 to
6 hours before placing food weighing
2 kg or more.
In order to utilise the freezing capa-
city, use the Fast function.
→
Note:
When the Fast function is
switched on, increased noise may
occur.
Switching on Fast function
▶
Press .
a
lights up.
