11
Electrical connection
Do not use extension cables or distributors.
The plug to secure the appliance must be freely
accessible. Connect the appliance to a 220
-
240 V / 50 Hz
ac current via a plug which has been properly installed.
The socket must be fused with a 10 to 16 A fuse.
For appliances operated in non-European countries,
the identification plate should be checked whether the
electric supply and the current model stated match the
vales of the mains supply. The rating plate is situated
in the bottom left-hand side of the appliance. The
power cord may be replaced by a technician only.
m
Warning
Never connect the appliance to electronic energy
saver plugs or to power inverters which convert the
direct current to 230 V alternating current (e.g. solar
equipment, power supplies on ships).
Factory settings
Upon leaving the factory, the appliance has been supplied
with the following settings:
z
Fascia language:
English
z
Temperature unit:
°C
z
The freezer compartment temperature:
–
18 °C
Note
The factory settings (language, temperature unit) can be
changed in the setup mode.
Switching on the appliance
z
Press the on/off button
O
.
The appliance starts to cool down when switched on for
the first time. When the door is opened, the interior light
comes on.
Note
The preset temperatures (factory settings) are reached
after several hours.
Do not put any food in the appliance beforehand!
To change the set temperatures –> see “Setting the
temperature”.
Selecting the temperature
The temperature can be set from –14
°
C to –24
°
C.
We recommend a setting of –18
°
C.
The temperature setting can be changed using the
+
(warmer) or
–
(cooler) setting buttons. The temperature
can be set at 1
°
C intervals.
To set the freezer compartment temperature:
z
Activate the setup mode with the button
<
or
>
.
The
FREEZER
symbol is displayed.
z
Set the desired temperature using the
+
(warmer)
or
–
(cooler) setting buttons.
