26
15.
Checking that the finger protector moves
easily
It is now essential to check that the finger protector moves
easily. At a later time any required corrections will be more
difficult.
Note:
The supplied finger protector can be used for both sides of
the door hinge.
Because of different installation possibilities, the finger
protector has to be shortened to the required length.
Shorten the finger protector at the upper side above
the covering strip by 55 mm (
1.
).
Push the offcut on the hinge side into the gap
between the appliance and cavity wall.
The part has to be easy pushing and pulling (
2.
)!
Ensure smooth running at all positions of the door (
3.
).
16.
Connecting the appliance to the water
supply
m
Caution!
Do not kink the hosepipe when bending, otherwise
there is the risk of water damage and leakage.
Supplied, is a flexible hose for a domestic mains
connection ¾”. Care should be taken that the ealing
elements supplied are fitted to the appliance and the shut-
off valve!
Remove the plugs from the appliance connection (
1.
).
Lay the water hose such that it ends at the appliance
connection (
2.
).
Slide the union nut and the sealing element onto the
water hose.
Attach the water hose to the appliance connection
and screw on the union nut (
3.
). Screw tightly, using
manual force.
Screw the union nut tightly using the fixed spanner.
Do not over tighten!
Push water hose back as far as possible into the
protective pipe (
4.
).
Turn the shut-off valve and the main water tap.