Gaggenau RB282304ID/04, User Manual, Page: 16 / 32

en
operation
16
operation
7 Basic operation
operation
7.1 Switching on the appli-
ance
1.
Press .
a
The appliance begins to cool.
a
A warning signal sounds, the tem-
perature display (freezer compart-
ment) flashes and lights up be-
cause the freezer compartment is
still too warm.
2.
Switch off the warning tone using
.
a goes out as soon as the set
temperature has been reached.
3.
Set the required temperature.
→
Page 16
7.2 Operating tips
¡
Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the set temperature has
been reached.
¡
The housing around the freezer
compartment is temporarily heated
slightly. This prevents condensa-
tion in the area of the door seal.
¡
When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
7.3 Switching off the appli-
ance
▶
Press .
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
▶
Press / (Refrigerator compart-
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows the required temper-
ature.
The recommended temperature in
the refrigerator compartment is
4 °C.
→
""OK" sticker", Page 19
Setting the freezer compartment
temperature
▶
Press / (Freezer compartment)
repeatedly until the temperature
display (freezer compartment)
shows the required temperature.
The recommended temperature in
the freezer compartment is
−18 °C.
8 Additional functions
8.1 Fast cooling
With Fast cooling, the refrigerator
compartment cools as cold as pos-
sible.
Switch on Fast cooling before placing
large quantities of food.
Note:
When Fast cooling is switched
on, increased noise may occur.
Switching on Fast cooling
▶
Press (Refrigerator compart-
ment).
a
(Refrigerator compartment)
lights up.
Note:
After approx. 15 hours, the ap-
pliance switches to normal operation.