en
Cleaning and servicing
26
Place ice packs (if available) onto
the food.
4.
Remove all fittings from the appli-
ance. →
15.2 Cleaning the appliance
WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
▶
Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
Liquid in the lighting or in the con-
trols can be dangerous.
▶
The rinsing water must not drip
into the lighting or controls.
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
▶
Do not use hard scouring pads or
cleaning sponges.
▶
Do not use harsh or abrasive de-
tergents.
▶
Do not use cleaning products with
a high alcohol content.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
▶
Never clean fittings and accessory
in the dishwasher.
1.
Prepare the appliance for cleaning.
→
2.
Clean the appliance, the fittings,
the components and the door
seals with a dish cloth, lukewarm
water and a little pH-neutral wash-
ing-up liquid.
3.
Dry thoroughly with a soft, dry
cloth.
4.
Insert the fittings and install the ap-
pliance components.
5.
Electrically connect the appliance.
6.
7.
Putting the food into the appliance.
15.3 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the extendable shelf
1.
Firmly pull out the extendable shelf
until the locking catch is released.
2.
Lower the shelf and swing it out to
the side.
Removing door rack
▶
Lift the door rack and remove it.
