12
Safety shut-off
A cooking zone is automatically switched off if the
setting is not changed for a long time. The time when
the safety shut-off is activated depends on the heat
setting selected (1 to 10 hours).
The cooking zone is switched off and the residual heat
indicator lights up on the heat setting display until the
cooking zone cools down.
You can switch the cooking zone back on again as
normal.
Options menu
In the options menu, you can adjust the following
functions for your cooktop:
▯
Activation
▯
Key tones
▯
Childlock
▯
Reset all values
▯
Selection time for selecting the cooking zone
Settings in the options menu
This table contains all of the functions and information
for making settings:
Display
Function
Information about making settings
™‚
Activation
The activation can be set individually for each cook-
ing zone that has activation. First, select the desired
cooking zone. Then use the
@
symbol to select the
required setting.
The activation is not activated when you switch on
the hob, and can be activated.*
The activation is activated when you switch on the
hob, and can be deactivated.
When you switch on the hob, the last state that
was used is set.
™ƒ
Button tones
Select the desired setting.
Note:
This setting does not affect the audible timer
signals, warning signals or the main switch signal.
‹
Key tones off.
‚
Key tones on.*
™„
Child lock
To be able to use the child lock, you must first ena-
ble this function in the options menu.
‹
Child lock cannot be activated.*
‚
Child lock can be activated.
™…
Reset all values
You can use this function to reset all of the values in
the options menu and the boiling times to their fac-
tory settings.
Reset all values: press the number 1 button. On the
display, a dot appears beside
š
.
Note:
The values will only be reset when you save
and exit the options menu. If there is already a dot
displayed next to
š
, all settings already correspond
to the factory setting.
š
Values do not correspond to the factory setting.
™†
Selection time for selecting the cooking zone
If you select a cooking zone, you must set the heat
setting within the selection time. If the selection
time is set to endless, you can change the heat set-
ting at any time without having to reselect the cook-
ing zone.
£
Selection time 5 seconds.*
£
.
Endless selection time.
*Factory setting
¦
