Gaggenau DV 461 710, Installation Instructions Manual

Page: 8 / 32

8
en-us
Installation Procedure
Installation Procedure
Installation Procedure
Installing the appliance
9
CAUTION
Tilt protection MUST be installed, otherwise the
appliance will tip when the drawer is open. Only
open the drawer if the tilt protection is installed.
Procedure
1.
Install the tilt protection (2a - 2d) .
Note: The height of the tilt protection can be adjusted
to make it easier to slide the appliance into the
kitchen unit.
2.
Connect the appliance.
3.
Slide the appliance into the unit (3a) .
Note: Make sure that the power cable is not pinched,
trapped or kinked.
4.
Center the appliance (3b) .
5.
Carefully open the drawer. Check whether the
appliance is properly protected against tilting
(3c) .
6.
Screw the appliance into place (3d) .
D
[
[
E
PP
F
G