Troubleshooting
en-us
41
Issue
Cause and troubleshooting
Food remnants on dishware.
Filters are inserted incorrectly and/or not engaged.
1.
Insert the filters properly.
2.
Twist filters into place.
Selected wash cycle is too light.
▶
Select a more intensive wash program.
▶
Adjust the sensitivity of the sensors.
Dishware has been precleaned too intensively. Then the sensors choose a lighter
cycle. Stubborn remnants cannot be entirely removed.
▶
Only remove large remnants of food and do not pre-rinse dishware.
▶
Adjust the sensitivity of the sensors.
Tall narrow containers in corner areas are not rinsed out adequately.
▶
Do not position tall narrow containers at too great an angle or in corner areas.
Upper rack on right and left not set to same height.
▶
Set the upper rack on the left and right to the same height.
Detergent residue in the appliance Lid of the detergent dispenser is blocked by items of dishware and will not open.
1.
Arrange dishware in the upper rack so the tab collecting tray is not obstructed by
dishware.
Items of dishware are blocking the dispenser lid.
2.
Do not place dishware or fragrance dispensers in the tab collecting tray.
The lid of the detergent dispenser is blocked by the tab and will not open.
▶
Position the tab in the detergent dispenser crosswise, not vertically.
Tabs are used in the quick or short cycle. There is not enough time for the tab to
dissolve.
▶
Select a more intensive Wash cycle or use Powder detergent.
Detergent may lose its cleaning or dissolving ability after being stored a long time,
or the detergent is clumped together.
▶
Change your Detergent.
Water spots on plastic parts.
Droplet formation on plastic surfaces is unavoidable due to the laws of physics.
Water spots are visible after drying.
▶
Select a more intensive program.
▶
Position dishware at an angle.
▶
Use rinse aid.
▶
Set the water softening system higher.
Summary of Contents for DF481700
Page 1: ...en us Use and Care Manual DF481700 Dishwasher Gaggenau...
Page 51: ......
