Gaggenau DF480800, User Manual

Page: 45 / 72

Home Connect
en
45
Basic setting Selection Description
WLAN on
off Switch the wireless network connec-
tion on or off.
The basic setting "WLAN" is only avail-
able once the appliance is connected
to the Home Connect app.
→
"Home Connect ", Page 45
Remote Start off
Manual
Permanent Activate or deactivate
→
"Remote Start ", Page 46 .
This basic setting is not available until
after you have connected the device
with the Home Connect app.
→
"Home Connect ", Page 45
Greeting on
1
off
Switch display of the brand name logo
on or off when the appliance is
switched on.
Factory setting Reset Restore changed settings to the fact-
ory settings.
The settings for initial start-up must be
configured.
1
Factory setting (may vary according to model)
16.2 Changing basic settings
1.
Press ⁠.
2.
To open the basic settings, press
for approx. 3 seconds.
3.
Press repeatedly until the display
shows the required setting.
4.
Press or repeatedly until the
display shows the right value.
You can change several settings.
5.
To save the settings, press for
approx. 3 seconds.
16.3 Setting the time
1.
To open the basic settings, press
for approx. 3 seconds.
2.
Press repeatedly until the display
shows "Time setting".
3.
Press or repeatedly until the
display shows the required time.
Holding down and will
change the set values in 10-minute
steps.
4.
To save the settings, press for
approx. 3 seconds.
Home Connect
17 Home Connect
Home Connect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.cn.