background image

 Safety instructions  

en

5

Safety instructions

Safety instructions

This appliance may be used by children over 

the age of 8 years old and by persons with 
reduced physical, sensory or mental 
capabilities or by persons with a lack of 
experience or knowledge if they are 
supervised or are instructed by a person 
responsible for their safety how to use the 
appliance safely and have understood the 
associated hazards.

Children must not play with, on, or around the 
appliance. Children must not clean the 
appliance or carry out general maintenance 
unless they are at least 8 years old and are 
being supervised.

Keep children below the age of 8  years old at a 
safe distance from the appliance and power 
cable.

Before you switch ON the appliance   

Please read the instructions for use and 
installation carefully. They contain important 
information on how to install, use and maintain 
the appliance.

Retain all documents for later use or for the 
subsequent owner.

You can download the instructions for use 
from our website free of charge. The relevant 
Internet address can be found overleaf on 
these instructions for use.

Delivery

1.

Check the packaging and dishwasher 
immediately for damage caused in transit. 
Do not switch on a damaged appliance, but 
contact your supplier.

2.

Please dispose of the packaging material in 
an environmentally friendly manner.

3.

Do not let children play with packaging and 
its parts. There is a risk of suffocation from 
collapsible boxes and film.

Installation

Following installation, ensure that the back 
of the dishwasher is not freely accessible 
(protection against contact due to hot 
surface).

Install and connect the appliance according 
to the installation and assembly 
instructions.

Prior to installation, disconnect the 
dishwasher from the power supply.

Ensure that the protective conductor system 
of the domestic supply has been correctly 
installed.

The electrical connection conditions must 
correspond with the specifications on the 
dishwasher rating plate 

9J

.

If the power cord of this appliance is 
damaged, it must be replaced with a 
particular power cord. 

To prevent injury, the power cord may be 
purchased from customer service only.

If the dishwasher is installed in a high-sided 
unit, the unit must be secured properly.

If the dishwasher is installed below or above 
other domestic appliances, follow the 
information for installation in combination 
with a dishwasher in the installation 
instructions for the particular appliances.

Also follow the installation instructions for 
the dishwasher to ensure that all appliances 
are operated safely.

If there is no information or if the 
installation instructions do not include the 
appropriate information, contact the 
manufacturer of these appliances to ensure 
that the dishwasher can be installed above 
or below these appliances.

If you cannot obtain any information from 
the manufacturer, you must not install the 
dishwasher above or below these 
appliances.

If you install a microwave oven above the 
dishwasher, the microwave oven may be 
damaged.

Summary of Contents for DF480161

















































Reviews: