en
Additional functions
30
Additional functions
Additional functions
* Depending on the features of your dishwasher, you
can select different additional functions
)*
.
¥
Power *
Power
The "Power" function can reduce the run time by approx.
20% to 66% depending on the rinse programme
selected. To obtain optimum cleaning and drying results
with a reduced run time, water and energy consumption
are increased.
§
Half load *
Half load
If you have only a few items to wash (e.g. glasses, cups,
plates), you can switch to “half load”. This will save
water, energy and time. It is recommended to put a little
less detergent in the detergent dispenser than for a full
load.
Ü
hygienePlus (HygienePlus) *
hygienePlus (HygienePlus)
This function increases the temperatures and
maintains them for an extra-long time to ensure a
defined disinfection performance. This slightly
increases energy consumption and the run
time.Continuous use of this function improves the
hygiene status. This additional option is ideal for
cleaning e.g. chopping boards and baby bottles.
Ï
IntensiveZone *
IntensiveZone
Perfect for mixed loads. You can wash very soiled pots
and pans in the lower basket together with normally
soiled tableware in the upper basket. The spray
pressure in the lower basket is intensified. This will
increase the run time and the energy consumption then
rises.
½
extraDry *
extraDry
A higher temperature during the final rinse and an
extended drying phase ensure that plastic parts will also
dry better. This slightly increases energy consumption.
The run time will be extended.
Ö
Energy Save *
Energy Save
The "Energy Save" function can be used to reduce
water and energy consumption. The run time is extended
for optimum cleaning and drying results.
Operating the appliance
Operating the appliance
Programme data
The programme data (consumption values) can be found
in the summary of instructions. They refer to normal
conditions and the water hardness set value °E 16 - 20
medium. Different influencing factors such as water
temperature or line pressure may result in deviations.
Opening the door
To open the door, press the upper middle part of the
door. The appliance opens automatically.
If you have activated the child-proof lock, press twice in
quick succession at the top of the door in the middle.
Changing the settings
The dishwasher has been preset with certain settings
for your convenience. You can change these factory
settings.
Change the setting as follows:
1.
Open the door.
2.
Switch on ON/OFF switch
(
.
3.
Press Info button
{8
for 3 seconds until the
following text is indicated on the display window at
the top
@
:
Scroll with
< >
Set with
- +
Leave with Setup 3 sec.
4.
Keep pressing button
>
)R
until the required setting
is indicated on the display window at the top
@
.
5.
Make the setting with setting buttons
+ -
`
.
6.
Press and hold the Info button
{8
for 3 seconds.
The chosen setting has now been stored.
Tip:
If you change several settings, first make all
changes in succession. Now press the Info button
{
8
for 3 seconds. This saves all set values in the
appliance.
