17
Additional options
Additional options
* depending on model
Additional options can be set with the buttons
X
.
¥
Power *
Power
The "Power" function can reduce the run time by
approx. 20% to 66% depending on the rinse
programme selected. To obtain optimum cleaning and
drying results with a reduced run time, water and
energy consumption are increased.
Half load
§
Half load *
If you have only a few items to wash (e.g. glasses,
cups, plates), you can switch to “half load”. This will
save water, energy and time. It is recommended to put
a little less detergent in the detergent dispenser than
for a full load.
·
Hygiene *
Hygiene
The temperature is increased during the cleaning
process. This increases the hygiene status. This
additional option is ideal for cleaning e.g. chopping
boards and baby bottles.
Ï
intensive *
Intensive
Perfect for a mixed load. You can wash very soiled
pots and pans in the lower basket together with
normally soiled utensils in the upper basket. The spray
pressure in the lower basket is intensified, the rinsing
temperature is increased slightly.
¿
Extra drying *
Extra drying
An increased temperature during the final rinse and
an extended drying phase ensure that even plastic
parts dry better. There is a slight increase in the
energy consumption.
Operating the appliance
Programme data
The programme data (consumption values) can be
found in the summary of instructions. They refer to
normal conditions and the water hardness set value
•
:
‹…
. Different influencing factors such as e.g. water
temperature or line pressure may result in deviations.
Aqua sensor
Aqua sensor *
* depending on model
The Aqua sensor is an optical measuring device (light
barrier) which measures the turbidity of the rinsing
water.
The Aqua sensor is used according to the programme.
If the Aqua sensor is active, “clean” rinsing water can
be transferred to the next rinse bath and water
consumption can be reduced by 3–6 litres. If the
turbidity is greater, the water is drained and is
replaced with fresh water. In the automatic
programmes the temperature and running time can
also be adjusted to the degree of soiling.
Zeolith drying
The appliance features a Zeolith container Zeolith is a
mineral which can store moisture and heat energy and
release them again.
During the washing step this heat energy is used to
dry the mineral and heat up the rinsing water.
During the drying phase moisture from the washing
compartment is stored in the mineral and heat energy
is released. This released heat energy is blown into
the washing compartment with dry air. This
accelerates and improves drying.
These processes therefore save a great deal of
energy.
m
Warnings
‒
Please ensure that the intake opening
1J
is not
obstructed and do not place any temperature-
sensitive utensils in the lower basket at the rear
right side above the blow opening
1R
.
‒
Do not touch the blow opening
1R
. The blow
opening becomes hot and, furthermore, any
damage will result in a chargeable callout by
customer service.