Gaggenau DF211100, Information For Use

Page: 36 / 64

en
Basic settings
36
Basic setting Selection Description
Water connection Cold water
1
Hot water
Set cold water or hot water connec-
tion.
Only set the appliance to hot water if
this can be prepared with little energy
and a suitable installation is available,
e.g. solar heating system with circula-
tion line. The water temperature
should be at least 40 °C and max.
60 °C.
Eco forecast on
off
1
Switch EcoCheck on or off.
When selecting the programme, the
average water consumption and en-
ergy consumption is briefly shown on
the display.
Emotion Light off
On via main
switch
1
On on opening
door
Switch the interior lighting of the appli-
ance on or off.
When the appliance door is opened,
the interior lighting switches off auto-
matically after 10 minutes.
Infolight on
1
off
Switch "Infolight" on or off.
While the programme is running, a
spot of light is projected onto the floor
below the appliance door. This light
will not be visible if the appliance is in-
stalled at eye level with the cabinet
front fitted flush. If the appliance door
is not completely closed, the spot of
light will flash. The programme has
ended when the spot of light is no
longer visible on the floor.
Start programme Eco
1
Prog. last selected
Set a default programme for when the
appliance is switched on.
Tone volume Scale with multiple
levels. Set the signal volume at the end of
the programme.
Level 0 switches the signal tones off.
Button volume Scale with multiple
levels Set the button volume during opera-
tion.
Level 0 switches the button tones off.
1
Factory setting (may vary according to model)